STUDIO CURTAINS — MEASUREMENT CHECKLIST
Complete one sheet per opening. Keep original readings; state cm or mm.

Room / opening reference:
Project postcode:
Measured by / date:
Units: cm / mm
Dimensions are: actual / proposed / from a drawing

TRACK AND WIDTH
Existing track make / model (if known):
Total straight-track curtain coverage W:
Physical track length (if different):
Window / opening width:
Proposed left extension:
Proposed right extension:
Stack position(s) when open:
For bays or bends: attach a plan with individual lengths and angles.

FINISHED DROP
Upper measuring reference (fabric top / glider eye / other):
Distance from that reference to floor or sill:
  Left:
  Centre:
  Right:
Chosen hem clearance:
Confirmed heading offset (if reference was not fabric top):
Agreed finished fabric drop D:
Do not add top or bottom sewing allowance to finished drop.

PANELS AND HEADING
Single / equal pair / other:
Opening direction (viewed from the room facing the window):
Pencil pleat / wave / double pinch:
Intended fullness:
Fabric / colour:
Lining:

OVERLAPS, RETURNS AND RECESSES
Centre overlap requirement:
Left and right side returns:
Window recess widths — top / middle / bottom:
Window recess heights — left / centre / right:
Usable recess depth:
Handles / sill / vents / radiators / other projections:
Head treatment / blackout requirement:
Intended acoustic wall cavity:

TRACK AND INSTALLATION
Wall / ceiling / recessed ceiling:
Known fixing surface / supporting structure:
Manual / motorised preference:
Power and control requirements:
Access restrictions / working height:
Survey or installation requested:

PHOTOGRAPHS TO ATTACH TO YOUR EMAIL
- Whole opening and surrounding wall / ceiling
- Side view showing depth and projections
- Existing track, carriers, brackets and end fittings
- Any bends, overlaps, returns or unusual details

Before using the configurator:
- Enter W once across all panels; do not halve it for a pair.
- Enter the finished cloth drop, not an unadjusted glider-to-floor reading.
- Do not multiply dimensions for fullness or add making allowances.
- Describe overlaps, returns and shaped tracks separately for review.
- Send uncertain dimensions for checking before production approval.

The online estimate assumes straight runs and equal panels. It does not
automatically add centre overlaps, returns or shaped-track geometry.
Track, hardware, delivery and installation are separately quoted.

Email this completed checklist and photographs to:
enquiries@studiocurtains.co.uk
0800 772 0367

The website does not send this checklist automatically.